Programming Apollo FP-A25 Pagers
Apollo FP-A25 pagers are Field Programmable.
In order to enter programming mode, take the battery 1/2 way out,
hold down the button that looks like this: ( || ) and re-insert the battery as you continue to hold down the (||) button for 5 seconds until the words “Password” and 0000 show up.
from there, push the button on the bottom right that looks like (’)
and program the frequency using the (||) and > buttons. When the frequency is programmed, press the (’) button to start entering capcodes.
After you’ve entered up to eight capcodes, you can also set a password to lock the programming of the pager. Press the (’) button one final time and the pager will reset and beep indicating that the new settings have taken effect.
You can also enter a diagnostic mode by removing the battery 1/2 way and holding down the (’) button for five seconds after re-inserting the battery.